This morning my Kerkos, I actually wanted to use for my MMC arrived after 2 months...
Problem: I have mercilessly testing jobs further increase no plan what to do so, because I used it FKPs xD already existing MMC as MMC. It would irritate me eigtl also to dancing as a Marx generator, nu I got few problems n this but ^^
No. 1: no fat resistors (which need I then eigtl about?)
No. 2: what power supply do I need? I ordered just so a ZT for 95ct at pollin... anything goes is if correctly wired? ^^
No. 3: the RANTS xD then the neighbors are happy again rofl
1.) as ordinary carbon resistors range, so 3-4 in series for a resistance value between 500Kilo-and 5Megaohm
2.) you need something what makes truly clean DC power (the Pollin ZT not so). Take a DST and strick because any 0815 control care. Some 10W range there also on performance.
3.) proposed 1,53Joule,wenn are you up to the Exutus ausreitzt the dielectric strength of Kondis. It is now still not SO according to...
What do you think actually of a Marx and a cascade to combine. Do you mean you omits two of the stages from the Marx and build a 10-stage cascade that you feed with your Pollin ZT from those 20 Kondis. Then you have
(a) a cascade, the friends about 30kV to the bereitställt download
(b) a Marx with 90kV output at about 1 joule
(c) a reasonable use for your AC Flyback.
Forget but not the resistor on the output of the cascade, so 10Megaohm solltens be. The resistance should be of course also according to voltage-proof...
PS: I have built a cascade HV electrical with 330nF Vicky without problems, fed by Paul's E shocker. There was always a deafening bang... and an approximately 2 cm long Flash so after about 30 seconds of loading time, I have a few tips:
1 the Reichelt I think there is RS up to 10kV, of which stop in series
2. If there is a DST, maybe... but a rectified Motstack would be better: mrgreen:: world domination:
3. so me swären in case the neighbors anyway, and otherwise they stop warning... "Caution, immediately it loudly, I want to play only but don't worry,
Không có nhận xét nào:
Đăng nhận xét